Florida master electrician exam: frequently asked questions

Yes. Florida electrical contractor certification examinations are open book. Candidates are responsible for bringing approved references and following all exam-room rules for books, tabs, notes, calculators, and markings.

The Technical/Safety section for the Unlimited Electrical Contractor exam has 100 scored questions.

The Technical/Safety section allows 5 hours of testing time.

Florida requires a passing score of at least 75% on each of the two examination parts required for certification.

The Florida Certified Electrical Contractor exam is offered in two parts. The Business section contains 50 scored questions, and the Technical/Safety section contains 100 scored questions.

Florida electrical contractor exams are scheduled through Pearson VUE after the candidate receives approval from the Florida Department of Business and Professional Regulation.

Florida electrical certification examinations are scheduled through Pearson VUE after the candidate is approved by the Department of Business and Professional Regulation.

The minimum percentage score required to pass both the Business section and the Technical/Safety section is 75 percent.

The Business section has a time allowance of 2.5 hours. The Technical/Safety section has a time allowance of 5 hours.

Florida does not issue a statewide license officially titled “Master Electrician.” The Certified Electrical Contractor, also known as the Unlimited Electrical Contractor license, is the Florida statewide electrical contractor credential most closely aligned with master-level preparation.

The Technical/Safety outline includes general theory and electrical principles, plan and specification reading, wiring and protection, wiring methods and materials, special occupancies and situations, OSHA and safety, life safety and ADA, electrical signs and outline lighting, and alarms and limited energy.

Florida does not issue one statewide license titled “Master Electrician” in the same format used by some other states. Florida licenses electrical contractors at the state level through DBPR and the Electrical Contractors’ Licensing Board, while some local jurisdictions use journeyman or master electrician terminology for local programs.

The Business section has a time allowance of 2.5 hours. The Technical/Safety section has a time allowance of 5 hours.

Important study areas include general theory and electrical principles, plan and specification reading, wiring and protection, wiring methods and materials, special occupancies and situations, OSHA and safety procedures, testing and tools, life safety, ADA topics, electrical signs, outline lighting, structural considerations, alarms, and limited energy.

A certified electrical contractor may work anywhere in Florida within the license scope. A registered electrical contractor is limited to the county or municipality where the registration is issued.

The Florida Certified Electrical Contractor license is the statewide electrical contractor credential most closely aligned with advanced contractor-level electrical preparation.

Yes. Permanently attached tabs may be used. Post-it notes, pull-off labels, and removable tabs are not allowed.

No. Class notes, formulas, sample questions, bound or loose-leaf study materials, notes, and similar materials are not allowed in the examination room.

Permanently attached tabs may be used in reference books. Moveable tabs, Post-it flags, pull-off labels, and removable tabs are not allowed.

No. Candidates are not permitted to make marks in their references during the examination. Handwritten and typewritten notes are not allowed in exam references.

Yes. The Business section is required for Florida electrical contractor certification categories. It includes 50 scored questions and allows 2 1/2 hours of testing time.

Use the practice exams throughout your study plan. Review missed questions carefully, identify weak topics, and return to the NEC-based material or approved references until the reasoning is clear.

Use the full final exams after completing several practice exams and reviewing your weaker areas. They work best as readiness checks near the end of your preparation.

Yes. Flash cards are useful for repeated review of formulas, definitions, safety concepts, code topics, and trade knowledge. They work well alongside longer study sessions and timed practice.